Winch Assembly and Operation Manual

Check that the diameter of the sleeve matches the diameter of the tip of the mast
and screw the top ball onto the plastic sleeve.
Place a cord protruding from the top of the flagpole inside the sleeve
through so that the end of the cord protrudes from one of the outlet grooves of the sleeve.
If the cord does not protrude enough from the end of the mast, give the cord
on top of the winch drum by turning the winch handle counterclockwise.
When turning the winch handle, keep the cord taut, otherwise the cord may become tight
a knot may form or the cord may be wound between the winch drum.
Insert the cord through the small plastic winding, towards its smaller opening
and then attach the metal carabiner to the cord. Made a knot
remains in the plastic winding slot.
Press the sleeve with the tip ball onto the end of the mast so that it locks in place.
Make sure that the mast does not rest on the top ball, place the mast if necessary
support under the top.
Wrap the flag weight around the mast and secure it with the flag rope
to the metal carabiner.
Mount the flag to the hinge plate using the hinge bolt and nuts,
which is pre-assembled on the foundation.
Push the flag upright and the pig with the adjustment nuts was created; turn
nuts closed. Do not raise the flagpole without resistance.