Flagpole assembly
- Connect the top ball to the plastic base (check in advance that the diameter of the base matches the diameter of the top of the mast). Press the end of the mast with the plinth and screw it on with screws.
- Secure the cord to the flagpole with bolts. For this purpose, the corresponding rivet nuts are mounted on the mast.
- Pass the flagpole through the hole in the top ball (perpendicular to the top ball) and attach both ends of the cord to the bollard.
- If there are plastic hooks on the flag, attach plastic hooks to the ends of the flagpole for easier attachment of the flag.
- Mount the flag to the hinge plate using the hinge bolt and nuts pre-assembled on the foundation.
- Push the flag upright and set the pig with the adjusting nuts, tighten the nuts.
- Check after about 1 month and retighten the nuts.